Fieldmann FDW 2002-E Operating Instructions Manual Download Page 8

9

USER‘S MANUAL

HIGH-PRESSURE WASHER

EN

Safety instructions

ATTENTION! 

WARNING  

Inappropriate extension cables can be dangerous. Should an extension cable be used, both 
the socket and the plug shall be of a waterproof design and the coupled parts shall be kept 
dry and with no connection with earth. We recommend using of an extension cable drum 
keeping the socket 60 mm above the ground as minimum.

ATTENTION! 

WARNING 

When leaving the device unattended, always turn the power off.

Carefully remove the tool and any accessories from the box. Do not discard any of the
packing materials until all parts are accounted for.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their safety.
Never use any accessories unless delivered together with the product or intended particularly
for the appliance.
Never repair the appliance yourself; do not modify the appliance - a risk of electrocution
is imminent! All repairs and adjustments of the appliance shall be done by the professional 
company/service. Tampering with the product during the warranty period may void the 
warranty.
Never use the product with wet hands or feet.
Operate and keep the product away from flammable and volatile substances.
Operate and keep the product away from extreme temperatures, direct sunlight, excessive
moisture and do not place it to the excessive dusty environment.
Do not place the product in close vicinity of heaters, naked flame and other appliances or
equipment generating heat.
Never use the product for other than intended purposes.
Before inserting the power cord into the socket, check whether the voltage you intend to use
complies with that of the machine.
Never lay the power cord in the vicinity of hot surfaces or over the sharp objects. Do not place
heavy objects on the power cord. Position the cord so that it will not be stepped on or tripped 
over. Make sure the power cord is not in contact with hot surface.
Should the power cord of the product be damaged, have it repaired by an authorized service
technician to prevent causing a dangerous situation. It is forbidden to use a product with a 
damaged power cord or plug.
Do not disconnect the power cord from the wall socket by pulling the cord.
Do not spray the product with water or any other liquid. Do not power water or any other
liquids into the product. Do not submerge the product in water or any other liquid.
Never use the product near a bathtub, wash basin or any other container filled with water.
If you are not using the product or if you know that you will not be using it soon, turn it off and
disconnect the power cord from the wall socket. Proceed in the same way prior to cleaning.

Summary of Contents for FDW 2002-E
























Reviews: