Fieldmann FDK 201202-E, User Manual

Page: 14 / 23

EN
CORDLESS CIRCULAR SAW USER’S MANUAL
Use and operation
15
6. USE AND OPERATION
The circular saw is supplied with a circular-saw blade intended for making straight cuts in wooden materials.
After replacement of the circular-saw blade, you can also cut plastics, thermoplastics, hard plastics, laminate,
polyurethane foam boards, mineral wool insulation boards, cement bricks, cellular concrete and products made
of non-ferrous metals. The saw is intended for household or hobby use only. Any other use is strictly prohibited.
7. CLEANING AND MAINTENANCE
Keep the engine vent holes clean and dust-free.
If the circular-saw blade is damaged, replace it immediately by a new blade of the same type.
ATTENTION! Before cleaning and maintenance, always unplug the supply cable of the tool from the socket.
The tool requires no special maintenance, just wipe the cover of the tool with a wet cloth on a regular basis.
Clean the vent holes on a regular basis.
Never clean any part of the tool using a hard, sharp or rough object.
8. CLEANING AND MAINTENANCE TIPS
Store the tool, accessories and instructions for use in the original packaging to ensure you always have all necessary
parts and information.
If the tool is not used for a long time, do not store it in places with high temperatures.
If practicable, store the tool in a place with constant temperature and humidity.
Avoid contact of the tool with humidity and water. Follow the instructions specified in the operating manual