EN
INVERTER WELDING MACHINE
USER’S MANUAL
5
General safety instructions
MALFUNCTION — WHEN TROUBLE HAPPENS, CONTACT WITH AUTHORIZED PROFESSIONALS
If trouble happens during installation and operation, please follow this manual instruction to check up.
If you fail to fully understand the manual, or fail to solve the problem with the instruction, you should contact
the suppliers or the service center for professional help.
WARNING!
Creepage-protecting switch should be added when using the machine!!!
WELD IN A WELL-VENTILATED ROOM!
The welding area must be well ventilated.
Use a belt or chain to attach the gas bottle to the instrument. The gas bottle must stand on a level ground.
Protect the gas bottle from heat, sunlight and rain. Dangerous, eg flammable objects should not be stored
near the device.
Use sufficient ventilation with forced circulation or local exhaust (forced suction) on the arc to remove
vapors.
IN THE EVENT OF A MALFUNCTION, ALWAYS CONTACT THE SPECIALISTS!
If you notice any problems during installation or operation, please follow these instructions.
If the manual fails to fully understand or fails to solve the problem, contact your inverter supplier or the
Sharks Service Center for professional help.
WARNING!
When using electric machinery and power tools, it is important to abide by and adhere
to the following safety instructions for reasons of protection against injury caused by
electric current, injury of persons and risk of starting fi res. The term “power tools” used
in the instructions below refers to power tools that are plugged into a power supply (by
a power cord) as well as tools running on a battery pack (cordless). Keep all warnings
and instructions for further use.
Work environment
Keep the work area clean and well lit. Untidiness and dark places on the job site are usually causes of
accidents. Store tools that are not used.
Do not use power tools in an environment where there is risk of starting a fi re or explosion; this refers to
places where there are fl ammable liquids, gases or dust. Sparks form on the power tool’s commutator,
which can cause dust or fume ignition.
When using power tools, unauthorized persons, especially children, should be denied entry to the job site!
In case you are interrupted, you can lose control of the current activity. In any case.
WARNING!
Carefully read the instruction manual before use.
Important safety warnings
Unpack the product carefully and be sure not to throw away any part of the package before having found all
components of the product.
Keep the product in a dry place out of reach of children.
