Fieldmann FDAK 12011, Instruction Manual

Page: 5 / 16

EN 5 INSTRUCTION MANUAL
FDAK 12011
Tires:
Push the valve lever connector onto the valve and close by moving the lever
downward.
Connect the power supply cable plug to the cigar lighter socket and turn the
ON/OFF switch to ON.
On reaching the required pressure remove the valve lever connector from the
valve spindle and disconnect the 12V plug from the socket.
Inflatables:
Select a matching adapter and attach to the valve lever connector .Close the
connector.
Insert the adapter into the item to be inflated.
Connect the power supply cable plug to the cigar lighter socket and turn the
ON/OFF switch to ON
On reaching the required pressure remove the valve lever connector from the
inflated item and disconnect the 12V plug from the socket.
This compressor is not designed for long continuous operation. With excessively
long operation the compressor will be overheated and will be damaged. If
operated carelessly or if the external metal parts become hot (detectable by
touch), it means that the compressor has been switched on for too long time
and is overheated. In this case switch off the compressor immediately and
leave it for to get cool (about 20 minutes) always after 10 minutes of continuous
operation.
This compressor may also be operated from a 12V battery charger. However to
avoid damage to compressor and charger 10 Amp or more are required.
TROUBLESHOOTING:
Compressor does not start /fuse blows:
Plug can be inserted deeply into the hole and can be turned in either direction.
Remove dirt from hole and plug. Use a non-conducting probe, never metal or
fingers.
Check cigar lighter fuse. Minimum capacity 10 Amp. Plug disconnected
.Compressor runs but does not inflate:
Connector –with dosed lever –should sit tightly in the valve.
Check the item to be inflated for leaks. Check hose and connections for
cracks and leaks
Compressor works too slowly:
Overheating after excessively long operation. Disconnect plug and leave to
cool for 20 minutes.
Voltage too low. Check battery.
1. Switch ON/OFF 2. Pressure Gauge
3.Supply Lead (Power Cord) 4. Adaptors
5.Air Output Hose