www.fi eldcontrols.com
Please retain these instructions after installation.
This device
MUST
be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition of
a qualifi ed agency is: any individual, fi rm, corporation or company which either in person or through a representative is engaged
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the
precautions required, and has complied with all the requirements of the authority having jurisdiction.
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.
Installation Date:
Installed By:
Phone:
SYSTEM CONTROL KIT
Model: CK-20FV
ITEMS INCLUDED IN KIT
1- Junction box
1- Fan control gas pressure switch with built in post purge option
1-
1
⁄
8
" NPT x 3" pipe nipple
1-
1
⁄
8
" NPT pipe tee
1- TCA-1 Thermocouple Adapter
1- 6 ft. length of 12-2 wire
1- 12" jumper wire
1- Flexible conduit connector
2- GSK-3 Spillage Switches
Designed for use with the SWG Series Power Venter for controlling 30-millivolt controlled Natural or LP Gas
appliances with a pressure tap port in the Gas Valve. This kit may also be used with the PVG series sidewall
Power Venters, DI series Draft Inducers, and CAS-4 Combustion Air System. The included junction box is not
required when using a PVG or CAS-4.
P/N
46285000
Rev K 01/18
