Fidelity Measurement CSa, Operation Manual

Page: 12 / 72

12
3.2 Keys & Display on Remote Controller
1
Depends on F11 setting.
2
Refer to F16 and F17 settings for details.
3
When F63 is set to On.
4
F60~F99 requests password or jumper to access.
No. Name Description
A [Tare] Press this key to tare off the weight of a container.
B [MR] Press this key to recall total stored transactions.
C [Func] Press this key to shift between weighing, peak hold,
animal weighing
1
and PCd mode.
D [MC] Press this key to erase total stored transactions.
E [Hold] Press this key to hold the current weight being display.
F IR Transmission indicator. Visible when IR signal is being
transmitted.
G [Zero] Press this key to set weight displayed to zero when
unloaded.
H [Print/
M+]
Press this key to send print data out and/or accumulate
current value to memory
2
.
I [Unit] Press this key to shift among various weight units (if
weight unit conversation is enable).
J [Set]
When in operation mode: -
•
Press and release to Introduce a preset tare
value
3
.
•
When in weighing mode: - press and hold for 2
seconds to access internal function setting mode
(F1~F38) or to prompt/introduce an operation
parameter/value during piece count, auto tare
accumulation and animal weighing mode.
During power on countdown process:
•
- press and release to access internal function
mode (F1~F99)
4
.
K [Off] Press this key to turn instrument off.