59
Appendix K: - Label Programming, Illustration & Samples
Prompt commands, information description, working mode and suggested length on label are listed on the below table
.
K.1 Label Prompt Command Table
Prompt
Command
34
Description
Suggested
Length
b
Product Code
18
c
Total accumulated pieces
10
d
Machine ID
4
e
Machine Group Number
2
f
Operator Number
4
K
Date
10
L
Time
8
M
No. of accumulated transaction (8 digits with leading space)
8
mm
No. of accumulated transaction (6 digits with leading zero)
6
N
Total accumulated weight
9
nn
Total accumulated weight without unit or decimal
6
O
Net weight
10
oo
Net weight without unit or decimal
6
P
Tare weight
10
pp
Tare weight without unit or decimal
6
Q
Gross weight
10
Gross weight without unit or decimal
6
R
HI limit
35
10
S
LO limit
36
10
T
Comparison Result
11
U
Number of piece
10
V
Average piece weight
9
Y
Weight hold
11
yy
Weight hold without unit or decimal
6
Z
Customer Code
18
34
Prompt commands are case sensitive.
35
Each working mode has its own Hi Limit format (weight for weighing & auto tare accumulation mode; pieces for piece count mode). If Hi Limit
has to be printed, set Hi Limit value under the preferred working mode.
36
Each working mode has its own Lo Limit format (weight for weighing mode& auto tare accumulation; pieces for piece count mode). If Hi Limit
has to be printed, set Hi Limit value under the preferred working mode.
