Fidelity Electronics FM180, Operation Manual

Page: 24 / 37

24
6.8 Shift among Quantity, Average Piece Weight and Weight Info
a.
Press [Unit] to shift among quantity, average piece weight and weight
info,
b.
Quantity Display format = numeric numbers & PCS (e.g 1000 PCS ) ,
c.
Average piece weight display format = numeric numbers & weight unit
& / (slash) & PCS (e.g.
499.960g/PCS ) ,
d.
Weight display format (when Piece Count Function is in effect) =
numeric numbers & weight unit & PCS (e.g.
500 kg PCS ).
6.9 To quit Piece Count Function
19
To quit Piece Count Function, press [Func] , then press [Zero] .
7. RS232 Data Output Mode
There are 3 data output modes are available
20
: -
 Mode 1 and Mode 2 are for communication with computer and other
peripherals which accepts and processes continuous data
communication,
 Mode 3 is for transmission to printer or other peripherals which accept
only single or manual data transmission.
7.1 Auto Weight Format String
21 22
Data is transmitted in ASCII code. Data format is listed on below table.
DATA BIT DESCRIPTION
1~2
MOTION STATUS
US = UNSTABLE
ST = STABLE
3 COMMA SEPARATION
4~5
NET/GROSS
NT = NET WEIGHT
GS = GROSS WEIGHT
19
After quitting, the average piece weight stored will be erased.
20
Refer to F18 for more information.
21
When F18 is either set to MODE 1 or Mode 2
22
Overloaded weight will not be sent.