63
I.4 Create & Upload Label to TSC Printer
I.4.1 Selecting the Correct Edition for Bartender Software
1. To enable label uploading from computer to TSC printer, it is necessary to run Bartender as
Automation or Enterprise Automation edition. Procedures as below: -
2. Install Bartender Software to computer. The Bartender software usually comes with the TSC prin ter. If
not, please contact your printer supplier.
3. Run Bartender, then click on Help, then click on Edition Selection.
4. Select Enterprise Automation or Automation, then click OK.
5. At this point, correct Bartender edition is selected.
I.4.2 Adding Information from Instrument to Label & Uploading to a TSC Printer
The below procedures are based on Bartender Label Software. If a different label creating software is used,
contact your label software dealer for more details if in doubt.
1.
Set the label printer as the default printer of your
computer.
2.
Create the foundation of a label by Bartender. All
information to be obtained from instrument should be
added afterward.
3.
Once the label foundation has been completed; (a) click
on File and (b) select Export Printer Code Template.
4.
On Print System; (a) select TSC KP-100/200 (Flash) and
(b) select to Port.
5.
Click More Option.
6.
Then (a) click Print Dialog Data Sources, then (b) click
on Format ID/Name.
7.
On Template Field, select Template Field for Type.
8.
Enter the correct label file name on Name/Value. Refer
to paragraph
14.1
for correct file name format. (a) Click
Copies, check KDU and (b) input asterisk (*) on Prompt
box.
9.
Below procedures explain how to edit information to be
obtained from instrument.
10.
Click Template Object Data Sources and Select the
object which information from instrument (for example
net, gross, tare weight and product code) to be sent to
printer and printed on label.
