41
11.6.4 Applying blank customer code and customer description
To apply blank customer code and customer description: -
1.
During normal operation status, long press numeric number key
0
.
2.
Press
[PF/Set] or [MR]
until
C Code
appears on LCD1 and press
[Print/M+]
.
3.
Instrument displays
PLU = 00
on LCD3.
4.
Press
[Print/M+]
to confirm.
5.
Instrument displays
Clear
on LCD3. At this point, customer code and customer description effect is
cancelled.
12. Customized Setting PLUs for Operation Settings & Parameters
This instrument is equipped with 100 Customized Setting PLUs for each of P1, P2 and PA. These PLUs are
used to save all the below operation settings/parameters of the current operation.
1.
Platform No.
2.
Customer Code
3.
Customer Description
4.
Product Code
5.
Product Description
6.
Unit Weight
7.
Lo Check Limits and target (weight / quantity)
8.
Hi Check Limits and target (weight / quantity)
9.
Check Target (weight / quantity)
10.
Auto Tare Type (i.e. Manual or Auto or Continuous)
11.
Preset Tare Value
12.
Date Format
13.
Expiry Duration
12.1 Save Current Operation Settings/Parameters to Customized Setting PLU
Procedures: -
1.
If more than one weighing platform is used, shift to the preferred platform.
2.
Create and make sure that all the above-mentioned 12 operation settings and parameters (#2
~#13) are correctly set and entered.
3.
Long press
[PLU]
.
4.
Instrument displays
Save
on LCD1.
5.
Enter the preferred Customized Setting PLU number (01 ~ 99) and press
[Print/M+]
.
6.
Instrument displays
Done
on LCD3.
At this point, current operation settings/parameters are saved and in effect.
12.2 Recall Operation Settings/Parameters from Customized Setting PLU
12.2.1 By Instrument keyboard
Procedures: -
1.
During normal operation status, press
[PLU]
.
2.
Instrument displays
Recall
on LCD1.
3.
Enter the preferred Customized Setting PLU number (01 ~ 99) and press
[Print/M+]
.
4.
Instrument displays preset tare value saved in this Customized Setting PLU on LCD3, then returns
to normal operation status.
