46
Alibi Management Report Construction Illustration
19.2 Define when a Transaction Data is saved to Alibi memory
It is important
to first define when transaction data should be saved to Alibi memory during system setup. To do so, go to F71 (distributor is needed) and select
the preferred parameter. 6 parameters are available.
a.
Off = No transaction will be recorded.
b.
Auto 1 = All stable weight (starts from gross zero or minus) is recorded by the system.
c.
Auto 2 = The highest stable weight value of a weighing process is recorded by the system (when all loads are removed and the gross weight returns to
zero or minus).
d.
Auto 3 = The last stable weight value of a weighing process is recorded by the system (when all loads are removed and the gross weight returns to
zero or minus).
e.
Manual = Transaction is recorded by the system when
[Print/M+]
is pressed.
f.
ACC = Transaction is recorded by the system when a new accumulated data is created or manually.
19.3 Adding Short Noted to Alibi Management Report
A 4-digit numeric short note can be added to an individual transaction when saving to Alibi memory. Follow the below procedures to create such note: -
