VT-501 Mainboard Manual
38
Infrared Connector: IR
This 10-pin male connector is used for connecting to the serial infrared (SIR)
port and allows transmission of data to another system which also supports the
SIR feature.
Power Block Connector: POWER
This 12-pin block connector is used for connecting to your standard 5V power
supply. In the picture below, notice that, in most cases, there are two marks
“ P8” and “ P9” on the surface of the connector. You have to insert the
“ P8” plug into the “ P8” section of the connector, and so forth for “ P9” . Two
black wires must be in the middle.