5
1.2 Hardware Installation
It’s very simple for the Maat installation. According to the diagram below, please connect
the power source and appropriate cable to the Maat system. You will easily to finish the
hardware installation.
1. Power LED (Green)
：
It’s to indicate system power status.
2. System LED (Red)
：
While system in booting process the LED will be quickly blinking. It will turn to be
slowly flash while system in normal operation.
3. Ethernet LED (Yellow)
：
The Ethernet LED used to indicate the successful connection of Ethernet LAN port.
It will become flash to indicate the transmission of Ethernet packet.
4. WAN LED (Amber)
：
The WAN LED is used to indicate the successful connection of Ethernet WAN port. It
will become flash to indicate the transmission of Ethernet packet.
5. Wireless AP LED (Blue)
：
The LED is used to indicate the successful connection of wireless LAN port. It will
become flash to indicate the transmission of wireless LAN packet.
The diagram below is the layout of connector in rear Maat server. Please connect the
power and network cable to finish the Maat server installation.
