FIC AT2, User Manual

Page: 107 / 124

Using Options
7
107
I
NSTALLING
M
EMORY
M
ODULE
Your computer comes with standard 256 MB, 512MB or 1024MB of
synchronous DDR SDRAM. You can increase system memory to a maximum
of 2048 MB in the system, by installing two small outline double inline memory
modules (SO-DIMMs) with installed base memory in the system.
The 256MB, 512MB and 1024MB memory modules are available:
To install the memory module:
1. Make sure the system is powered off, the battery also is removed and that
no peripheral devices are attached.
2. Turn the computer upside-down and locate the screw that secures the
DIMM door at the underside of the notebook.
3. Remove the screw and open the DIMM cover by your finger.
4. Locate the memory module into the empty memory module sockets.
(Your system comes with one memory module already installed in the
socket.)