AquaPAD System User’s Manual
20
Set up the cradle:
To attach the AquaPAD to the cradle, place the AquaPAD over the cradle. Please follow
these steps:
Find the connector on the bottom of the AquaPAD. A rubberized cover protects this
connector as shown in
[Figure. 3.10]
below.
Slide the latch from right to left orientation as shown in
[Figure. 3.11]
below.
Place the female connector of the AquaPAD to the male connector on the cradle as
shown in
[Figure. 3.12]
below.
Figure 3.10 The rubberized connector cover
Figure 3.11 The cradle connector
Figure 3.12 AquaPAD with the cradle