The copyright of this document is owned by Fibocom Wireless Inc., and the document shall not be replicated without approval.
SC806Hardware User ManualPage59 of 70
friction between micro-electronics, etc., discharging to the module through various channels may cause certain
damage to the module, so ESD protection should be taken seriously. In the process of R&D, production assembly
and testing, and especially in product design, ESD protection measures should be taken. For example, anti-static
protection should be added at the interface of the circuit design and at the points susceptible to electrostatic
discharge or impact. Anti-static gloves should be worn during production.
ESD performance parameters Table 1-6 (Temperature: 25°C, Humidity: 45%)
Table43ESD performance
Test Point
Contact Discharge
Air Discharge
Unit
VBAT, GND
±5
±10
kV
Antenna interface
±4
±8
kV
Other interface
±0.5
±1
kV
10
Structural specification
10.1
Product appearance
The SC806 module appearance is shown in the figure:
Figure 19Module Product Appearance
