© Pur
eL
ink GmbH
I n n o v a t i o n G e r m a n E n t e r p r i s e s .
K n o w - H o w . Q u a l i t y . D e s i g n .
PureLink GmbH | Von-Liebig-Straße 10 | 48432 Rheine | Germany | Tel.: 0049 (0)5971-800 299-0 | E-mail: [email protected] | Internet: www.purelink.de
FiberX DVI/Fiber Extender Detachable –
User Manual
FX-D120
Package Contents
Please make sure all of the following items are included in the package:
1
FX-D120 Transmitter & Receiver
2
+5V DC Power supply x 2pcs
3
User Guide
If any of the above items are missing, please contact your supplier for support.
Note:
Package content may differ if you have placed a special order or placed order from anywhere other than PureLink GmbH. PureLink GmbH
reserves the right to make changes without further notice to a product described herein to improve reliability, design, packaging or function
.
Thank you for purchasing FX-D120
The detachable FX-D120 Single Fiber DVI Extension Set extends 1080p HD
content up to 300m over a multimode cable. It represents the first available
solution, which fully supports HDCP content protection. Featuring PureLink‘s
first “Real pass through EDID” feature, EDID lear ning belongs to yesterday.
This simplifies installation and cable manage ment and ensures rapid com
-
munications between different devices.
Installation
Installation Steps:
1
Connect transmitter to the DVI port on your computer.
2
Connect Receiver to the DVI port on your digital display product
3
Connect Multi-mode LC connector type 1 channel standard fiber optic cable
between transmitter and receiver.
4
Connect power adapters (or USB power cable) to both of transmitter and receiver module.
* If source device and display device has USB port, FX-D120 can be supplied power
from the USB port using USB power cable instead of power adapter.
Note:
Please use DC adapter (5V, 2A) included in the package for transmitter and receiver. We provide one USB power cable in the package.
DC +5V
Power jack
LC type optical port
LED indicator
LED indicator status
Fast blinks :
The system is booting properly. After plug adapter, LED will blink fast for 2~3 seconds
Solid:
Communication between transmitter and receiver is established. Ready for proper operation.
Regular on/off:
No communication between transmitter and receiver. Check for fiber connection or power adapter.
