Fiberplex FOI-5402 User Manual Download Page 4

Warranty, Service and Terms and Conditions of Sale 

For information about Warranty or Service information, please see our published ‘Terms and Conditions of 
Sale’. This document is available on 

fiberplex.com 

 or can be obtained by requesting it from 

[email protected]

 or calling 301.604.0100. 

Disposal 

Disposal of Packing Materials  

The packing materials have been selected with environmental and disposal issues in mind. All packing material 
can be recycled. Recycling packing saves raw materials and reduces the volume of waste. If you need to 
dispose of the transport packing materials, recycling is encouraged. 

Disposal of Used Equipment  

Used equipment contains valuable raw materials as well as substances that must be disposed of 
professionally. Please dispose of used equipment via an authorized specialist dealer or via the public waste 
disposal system, ensuring any material that can be recycled has been. Please take care that your used 
equipment cannot be abused. After having disconnected your used equipment from the mains supply, make 
sure that the mains connector and the mains cable are made useless. 

Disclaimer 

The information in this document has been carefully checked and is believed to be accurate at the time of 
publication. However, no liability is assumed by FiberPlex for inaccuracies, errors, or omissions, nor for loss or 
damage resulting either directly or indirectly from use of the information contained herein.

  

 

Summary of Contents for FOI-5402

















Reviews: