8
to follow all instructions may result in serious injury.
UL!
eed 500 lbs.
ntering enclosure.
e.
BOVE.
RO KUBE.
© 2008 Fiberlock Technologies, Inc.
performing to
expectations, and that staff understands proper use.
FOR ADDITIONAL ASSISTANCE, CONTACT
FIBERLOCK AT 800-342-3755
Kontrol Kube ABACUS AND TOPSIDER
SAFETY INSTRUCTIONS
WARNING: Failure
INSPECTION
use.
1.
Inspect for damage or missing parts before each
2.
Never use Kontrol Kube with missing or damaged parts.
3.
Check to see that all parts are in good condition.
Never repair a d
4.
amaged Kontrol
manufacturer.
Kube without permission from
PROPER SET UP AND USE
5.
Inspect for damage or missing parts before each use.
6.
READ ALL LABELS!
7.
DANGER! METAL CONDUCTS ELECTRICITY! BE CAREF
Use care when using near electrical lines and circuits.
8.
You should never use a Kontrol Kube if you are not in good
physical condition.
ort the weight of one person
9.
Kontrol Kube base is designed to supp
and material. Maximum weight not to exc
ors.
10.
Do not use in front of unlocked do
11.
Place Kontrol Kube on firm level ground.
12.
Do not use on slippery surfaces.
13.
Never place anything under Kontrol Kube base to gain height or
adjust for uneven surfaces.
14.
Check that all four casters are locked and firmly supported to
prevent excessive movement.
15.
Use extreme caution getting into and out of the Kontrol Kube.
16.
Never move, or have someone else move the Kontrol Kube while
in the unit.
17.
If using a ladder inside Kontrol Kube, read, understand and follow
ladder manufacturer’s instructions.
18.
Do not use any components not supplied or approved by the
manufacturer of this product.
Do not use if interior surfaces are wet. If wet, surfaces ma
19.
slippery. Dry interior surfaces before e
y be
PROPER CARE AND STORAGE
1.
Always keep Kontrol Kube clean of all foreign materials.
2.
Never store materials on Kontrol Kube.
3.
Properly support and restrain Kontrol Kube in transit or storag
Wear damage from transit may weaken the Kontrol Kube.
For additional care, use, and safety inst
4.
ructions cont
employer, dealer or the manufacturer.
act your
Manufacturer can be contacted at 800-342-3755.
DESCRIBED A
ALWAYS USE KONTROL KUBE AS
NEVER MISUSE OR ABUSE A KONT
L
The Kontrol Kube must be used only as part of a comprehensive
airborne contaminant control program. This program must include
staff training in the set-up and use of the Kontrol Kube and related
equipment. Unit should always be set up in advance in a mock
situation to determine that the Kontrol Kube is
