127 Business Park Drive Version 1.0 July 2015
Frankfort, NY 13340 USA
TEL: (800) 894-9694 FAX: (315) 895-8436
Http://www.fiberdyne.com
Page 1
Http://www.fiberdyne.
com FHC 10/100 Series Media Converter
Overview
The Fiberdyne Labs FHC 10/100
Series
Media Converter makes it possible to mix network media to optimize
total cost of ownership when you are extending legacy twisted-pair network to a fiber-optic backbone. It is primarily
designed for larger and higher bandwidth demanding workgroups that require expansion of the Ethernet network.
The 10/100Mbps
media converter series features a RJ45 jack and ST/SC fiber optic connectors, connecting the
10/100Mbps network to the 100BASE-FX (fiber optic) network. At full duplex mode, the converter can extend
distance up to 2 kilometers for multimode fiber and up to 100 kilometers for single mode fiber, maximize conversion
options and network design flexibility.
FCC warning
The F H C 1 0 / 1 0 0 series media converter have been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These standards are designed to provide reasonable
protection against harmful interference when these devices are operated in commercial environment These
devices can use, generate and radiate radio frequency energy and may cause harmful interface to radio
communications unless installed in accordance with this User
’s Guide. Operation of this device in a residential area
is likely to cause harmful interface which will make the user responsible for the appropriate remedial action at
his/her own expense.
CE mark Warning
These are Class A products. In a domestic environment these products may cause radio interface in which case the
user will need to consider adequate preventative measures.
Package Content
Thank you for purchasing our Ethernet Media Converter. Before you start installing the Media Converter, verify the
following items in the package
o Media Converter
o
User’s Manual
o Power Adapter
Features
·
Compliant with IEEE802.3 10Base-T, and IEEE802.3u 100Base-TX/FX standards
·Support auto-negotiation function in TP port to detect speed (10/100M) and duplex mode (full/half) automatically
· Support auto uplink (auto MDI/MDI-X) in TP port, no more cross-over cable
· Extend fiber-optic distance up to 100km with single mode fiber
· Provide various fiber-optic interfaces with ST/SC/FC connectors
· Mountable in the FHC-4000 converter chassis (optional card package)
New features (optional)
· Auto Uplink: User can connect to PC or switch/hub by using either straight-through or cross-over
