Fiber Tronix FT-FRXID-RM-SCAPC, Operation Manual

Page: 4 / 5

4
Specifications
NO. Item Unit Description Remark
Optical Input
1
Optical Input Wavelength nm 1200
～
1600
2
Optical Input Power dBm -8
～
+2
3 Optical Connector Type FC/APC or SC/APC
4 Optical Output Loss dB
≥
45
5 Backup Receiver Switching Operating
Point
dBm
－
7 Optional
RF Output
6
Frequency Range MHz
47
～
860/1000
7
Flatness dB ±0.75 (output 1
、
2)
8 RF Output Test dB -20±1
9 Output Level dBmV
≥
36
10
RF Output Slope Adjustment dB
0
～
18dB
（
factory preset to
0dB
）
11 RF Impedance
Ω
75
12
Return Loss dB
≥
16(47
～
860MHz)
13 Optical Power Monitoring Point V/mw 1
14
CNR dB 51
（
system indicators
）
（
2
）
15
CSO dB -61
（
system indicators
）
16
CTB dB -65
（
system indicators
）
17
Power V
～
220,+10%/-20%
18
Operating Temperature
℃ －
10
～＋
50
Installation
1. Unpacking
Open box and inspect for damages. Locate the optical receiver, power cord, and user’s
manual.
2. Mounting
The FT-FRXID-RM-SCAPC is a rack mountable 1RU device. To ensure sufficient
cooling, it is recommended to leave 1.75” spacing above and below device.
3. Making Connections
Plug the power cord into the power supply socket and switch the power on.
All optical connections to the FT-FRXID-RM- SCAPC are SC/APC connections. Be
sure to clean all optical connectors before connection. Connect SC/APC connector to
“OPT In” on the rear of the transmitter.