20
Appendix D: Starting recovery HC2
Entering Recovery mode using physical buttons located on the device
Turn the Home Center 2 OFF by
pressing and holding
the Power button for few seconds or by
disconnecting the power supply.
When turned OFF, turn it ON again with
recovery button pressed
. Keep holding the button.
Release
the button when the LED diodes start
flashing from left to right
.
IMPORTANT:
Don’t hold the Recovery button for too long!
If you hold the Recovery button for 10
seconds the Home Center will change its IP between dynamic and static, see
Appendix B - How to
change the Home Center IP address to static or dynamic (DHPC)?.
Entering Recovery Mode is
signalled with a control diode
.
Type in the
IP address
of your Home Center 2 in the web browser or use FIBARO Finder.
Recovery Mode screen
will be displayed: