Page 1: ......
Page 2: ... V If You don t have any voltmeter please simply try to change the battery from other efficient module STEP 3 Resetting FIBARO Door Window Sensor The FIBARO Door Window reset erases the EEPROM memory including all information on the Z Wave network and the main controller Reset procedure take off the sensor s cover and remove battery make sure the tamper isn t pressed put the magnet near sensor ins...
Page 3: ...troller put the magnet near the sensor The device should change its state in the interface take the magnet away from the sensor The device should change its state in the interface again check whether LED is blinking during test STEP 6 Loose casing Casing in the sensor shouldn t be loose If such situation occurred please follow check whether casing is closed properly from both sides of the sensor c...
