13
ADVAnCED PARAMETERS
53. Temperature offset
The value to be added to the actual temperature, measured by the sen-
sor (temperature compensation).
Available settings:
-1000–1000
(-100–100°C, 0.1°C step)
Default setting:
0
(0°C )
Parameter size:
2
[bytes]
54. Temperature alarm reports
Temperature alarms reported to the Z-Wave controller. Thresholds are
set in parameters 55 and 56.
Available settings:
0
- temperature alarms disabled
1
- high temperature alarm
2
- low temperature alarm
3
- high and low temperature alarms enabled
Default setting:
0
Parameter size:
1
[byte]
55. High temperature alarm threshold
If temperature is higher than set value, overheat notification will be
sent and high temperature scene will be triggered (if activated).
Available settings:
1-600
(0.1-60°C, 0.1°C step)
Default setting:
350
(35°)
Parameter size:
2
[bytes]
56. Low temperature alarm threshold
If temperature is lower than the set value, underheat notification will
be sent and low temperature scene will be triggered (if activated).
Available settings:
0-599
(0-59.9°C, 0.1°C step)
Default setting:
100
(10°)
Parameter size:
2
[bytes]