Fiat Uconnect 5.0 Manual Download

Page: 70 / 142

Remaining journey time, the remaining distance and
your estimated arrival time

Press this part of the status bar to open the Route
Summary screen.

To change the information shown in the status bar,
press the “Status bar” button in the Settings menu.

Speed limit, if known

To see the difference between your preferred arrival
time and your estimated arrival time, check the Lee-
way checkbox in the Status bar settings.

Press this part of the status bar to switch between a 3D
map and a 2D map.

Name of the street you are on

Navigation instruction for the road ahead and the
distance to next instruction

If the second instruction is less than 150m after the

first instruction, you see it shown immediately instead
of the distance.

Press this part of the status bar to repeat the last voice
instruction.

Driving View Symbols

Navigation instructions muted

This symbol is shown when the navigation
instructions have been muted.

To hear navigation instructions again, push the middle
panel in the status bar.

Advanced Lane Guidance

About Lane Guidance

NOTE:

Lane guidance is not available for all junctions or

in all countries.

NAVIGATION — If Equipped

Summary of Contents for Uconnect 5.0















































































































































Search results

Summary of Contents for Uconnect 5.0

Reviews:

Related manuals for Uconnect 5.0

Brands by name

Popular brands

Fiat Uconnect 5.0, Manual

Search results

Summary of Contents for Uconnect 5.0

Reviews:

Related manuals for Uconnect 5.0

Brands by name

Popular brands