A Activate the Bluetooth application of
the device.
Note:
For the operation of the device,
refer to its instruction manual.
B Press the pick-up button or talk
button with a short press.
C Say: [Beep] “Setup”.
D Prompt: “Select one of the following:
Pairing options, confirmation
prompts, language, pass code,
select phone or select music
player”.
E Say: [Beep] “Pairing options”.
F Prompt: “Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code”.
G Say: [Beep] “Pair”.
H Prompt: “Start the pairing process
on your Bluetooth device. Your
pairing code is 0000 (XXXX). Input
this on your Bluetooth device when
prompted on the device. See device
manual for instructions”.
I
Using the device, perform a search
for the Bluetooth device (Peripheral
device).
Note:
For the operation of the device,
refer to its instruction manual.
J
Select “124 Spider” from the device
list searched by the device.
K Input the 4-digit pairing code to the
device.
L Prompt: “Please say the name of the
device after the beep”.
M Say: [Beep] “XXXX - - -” (Say a
“device tag”, an arbitrary name for
the device.) Example: “Stan's
device.”
Note:
Say a paired “device tag” within
10 seconds. If more than two devices
are to be paired, they cannot be paired
with the same or similar “device tag”.
N Prompt: “XXXXXX - - - (Ex. “Stan's
device”) (Device tag). Is this
correct”?
O Say: [Beep] “Yes”.
P Prompt: “Pairing complete”.
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth Hands-Free again,
or by activating Bluetooth Hands-Free
first after switching the ignition from
OFF to ACC, the system reads out
a voice guidance, “XXXXXX - - - (Ex.
“Stan's device”) (Device tag) is
connected”.
Note:
When the pairing is completed, the
symbol is displayed.
Some Bluetooth audio devices
need a certain amount of time before
the symbol is displayed.
Device registration can also be
done by operating the audio unit.
Depending on the device, the
registration status may be lost after a
certain period of time. If this occurs,
repeat the entire process from Step A.
Registered Device Read-Out
Bluetooth Hands-Free can read out the
devices registered to its system.
Proceed as follows:
Caution!
Do this function only when parked. It is too
distracting to attempt while driving and
you may make too many errors to be
effective.
A Press the pick-up button or talk
button with a short press.
B Say: [Beep] “Setup”.
24
FIAT
Radio
3.0
