![Fiat Bravo Soundsystem Manual Download Page 23](http://html.mh-extra.com/html/fiat/bravo-soundsystem/bravo-soundsystem_manual_2286418023.webp)
QUICK GUIDE
22
FUNCTIONS AND ADJUSTMENTS
COMP
ACT
DISC PLA
YER
MP3 CD PLA
YER
CD
CHANGER
INTRODUCTION
RADIO
5 - NEWS (new programmes on/off)
This function is similar to the TA function:
with FM station tuned and NEWS function
active if a news bulletin is broadcast, the
sound system will:
– set the same volume as for TA function,
if TUNER (Radio) is on;
– switch the current audio source (CD or
CD Changer) to TUNER (Radio) and set
the same volume as for TA function.
It is necessary that in TUNER mode (Ra-
dio), the radio is tuned to a FM station
broadcasting the NEWS code.
Use buttons
È
or
Í
to turn this function
on/off.
The display will show the current function
condition:
– “NEWS: ON” = function on
– “NEWS: OFF” = function off
6 - SVC (automatic volume
adjustment with car speed)
The SVC function makes it possible to au-
tomatically adapt the volume level to the
speed of the car, increasing it as the speed
increases to maintain the ratio with the
noise level inside the passenger compart-
ment.
Press
È
or
Í
to change the SVC setting,
from OFF to the gain level (1 to 7) se-
lected. High gain level values correspond
to high volume levels when the car speed
increases.
The display will show the current function
condition:
– “SPEED VOLUME OFF” = function off
– “SPEED VOLUME: +3” = function on
and gain level set.
7 - EON TA DX/LO (traffic
announcements tuning sensitivity)
This function enables to change the re-
ception sensitivity of radio stations broad-
casting traffic announcements.
Use buttons
È
or
Í
to turn this function
on/off.
The display will show the current function
condition:
– “TRAFFIC: LOCAL” = low sensitivity
– “TRAFFIC: DISTANT” = high sensitivi-
ty
8 - LOUDNESS (loudness on/off)
The Loudness function improves the
sound volume when listening at low lev-
el, increasing the basses and trebles.
Use buttons
È
or
Í
to turn this function
on/off.
The display will show the current function
condition:
– “LOUDNESS: ON” = loudness on
– “LOUDNESS: OFF” = loudness off