71
GEAR USE
To engage the gears, press down
the clutch and put the gear lever into
one of the positions shown in the
diagram in fig. 2 (the diagram is also
on the gear lever knob).
IMPORTANT The car can be put
in reverse only when it has com-
pletely stopped moving. With engine
running, before engaging the reverse,
wait at least 2 seconds with clutch
pedal completely pressed down to
prevent damage and grating of gears.
Do not drive with your
hand resting on the gear
stick as the force exerted,
even if only slight, could lead to
premature wearing of the gear-
box internal components.
fig. 2
P5S00679m
SAFE DRIVING
In designing the Fiat barchetta, Fiat
has made every effort to come up with
a car able to provide driver and pas-
senger with top-class levels of safety.
Nevertheless it is always the behaviour
of the person at the wheel that de-
termines road safety.
Below you will find some simple tips
to help you travel in safety under dif-
ferent conditions. You will no doubt
be familiar with many of them already
but it will be useful to read them all
carefully.
You must push the clutch
pedal fully down to change
gear properly. It is therefore essen-
tial that there is nothing under the
pedals: make sure mats are lying
flat and do not get in the way.
WARNING
