Fiat 500L 2020, Owner'S Manual

Page: 14 / 284

12 GETTING TO KNOW YOUR VEHICLE
La operación de este equipo está sujeta a las
siguientes dos condiciones:
1. es posible que este equipo o dispositivo no
cause interferencia perjudicial y
2. este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.
NOTE:
Changes or modifications not expressly approved
by the party responsible for compliance could
void the user’s authority to operate the equip -
ment.
VEHICLE SECURITY ALARM
The vehicle security alarm monitors the vehicle
doors for unauthorized entry and the ignition
switch for unauthorized operation. While the
vehicle security alarm is armed, interior
switches for door locks and liftgate release are
disabled. If something triggers the alarm, the
vehicle security alarm will provide the following
audible and visible signals: the horn will pulse,
the park lamps and/or turn signals will flash,
and the vehicle security light on the instrument
panel will flash.
To Arm The System
1. Remove the key from the ignition switch
and exit the vehicle.
2. With all doors and liftgate closed, lock the
door using the Remote Keyless Entry (RKE)
key fob.
3. The horn will sound and the vehicle secu -
rity light on the central lock/unlock button
on the dashboard will switch on for approx -
imately three seconds. This shows that the
vehicle security alarm is about to arm.
During this period, if a door is opened, or
the ignition switch is turned to MAR (ACC/
ON/RUN), or the power door locks are
unlocked in any manner, the vehicle secu -
rity alarm will automatically disarm. After
approximately three seconds, the vehicle
security light will flash. This shows that the
vehicle security alarm is fully armed.
The activation of the vehicle security alarm is
followed by a self-diagnosis stage. If a fault is
detected during the self-diagnosis stage, the
horn will sound a second time.
If the horn sounds a second time, check that all
doors, the hood, and the liftgate are closed
correctly, and then rearm the system.
If the vehicle security alarm sounds the horn a
second time even when all doors, hood and lift -
gate are correctly closed, a fault has occurred in
the operation of the system. Contact an autho -
rized dealer.
NOTE:
The vehicle security alarm with not arm when the
mechanical key is used on a single door lock
cylinder.
To Disarm The System
Push unlock on the key fob, or insert the key
into the ignition switch and turn the ignition
switch to the MAR (ACC/ON/RUN) position.
NOTE:
The vehicle security alarm will not disarm when
the metal insert of the key is used on a single
door lock cylinder.
The vehicle security alarm is designed to protect
your vehicle; however, you can create condi -
tions where the vehicle security alarm will arm
unexpectedly. If you remain in the vehicle and
lock the doors with the key fob, once the vehicle
security alarm is armed, when you pull the door
handle to exit, the alarm will sound. If this
occurs, push the unlock button on the key fob to
disarm the vehicle security alarm.
20_BG_OM_EN_US_t.book Page 12