Fiat 500e 2017, User Manual

Page: 18 / 164

CHARGING THE HIGH VOLTAGE BATTERY
1 . Put the vehicle in PARK .
2
.
Turn the ignition to the OFF position
.
3
.
Remove the Level 1 EVSE from its storage bin by lifting the rear cargo cover
.
4 . Uncoil the entire length of the EVSE
(charge cord)
.
5
.
Plug the EVSE into a standard 120V AC
outlet that is properly grounded
. It is
recommended that the EVSE is con-
nected to an AC outlet on a circuit
which is not electrically loaded by other
devices
. Extension cords may not be
used .
NOTE:
All of the EVSE LED’s illuminate green .
6 . Open the charge receptacle door .
NOTE:
The charge receptacle door is locked
whenever the vehicle is locked
. Unlock the doors to unlock the charge receptacle door
for charging .
7
.
Plug the EVSE into the charge receptacle
.
Push the EVSE in firmly until it is completely
engaged (if not completely engaged the vehicle may not charge) .
Electric Vehicle Supply Equipment (EVSE)
Charge Receptacle
GETTING STARTED
16