
Rear Head Restraints
To raise the head restraint, pull upward on the head restraint
.
To lower the head re-
straint, push the adjustment button, located at the base of the head restraint, and push
downward on the head restraint
.
Refer to “Occupant Restraints” in “Things To Know Be-
fore Starting Your Vehicle” in your Owner’s Manual on the DVD for further information
on tether routing
.
NOTE:
To remove the head restraint, raise it as far as it can go then push the release button and
the adjustment button at the base of each post while pulling the head restraint up
.
To
reinstall the head restraint, put the head restraint posts into the holes and push down-
ward
.
Then adjust the head restraint to the appropriate height
.
WARNING!
ALL the head restraints MUST be reinstalled in the vehicle to properly protect the oc-
cupants
.
Follow the re-installation instructions above prior to operating the vehicle or
occupying a seat
.
SEATS
Seats are a part of the Occupant Restraint System of the vehicle
.
WARNING!
•
It is dangerous to ride in a cargo area, inside or outside of a vehicle
.
In a collision,
people riding in these areas are more likely to be seriously injured or killed
.
•
Do not allow people to ride in any area of your vehicle that is not equipped with
seats and seat belts
.
In a collision, people riding in these areas are more likely to
be seriously injured or killed
.
•
Be sure everyone in your vehicle is in a seat and using a seat belt properly
.
GETTING STARTED
33