Tire Service Kit Usage Precautions
•
Replace the Tire Service Kit Sealant Bottle (1) and Sealant Hose (6) prior to the expi-
ration date (printed at the lower right hand corner on the bottle label) to assure opti-
mum operation of the system
.
Refer to “Sealing a Tire with Tire Service Kit” section
(F) “Sealant Bottle and Hose Replacement”
.
•
The Sealant Bottle (1) and Sealant Hose (6) are a one tire application use and need to
be replaced after each use
.
Always replace these components immediately at your
original equipment vehicle dealer
.
•
When the Tire Service Kit sealant is in a liquid form, clean water, and a damp cloth will
remove the material from the vehicle or tire and wheel components
.
Once the sealant
dries, it can easily be peeled off and properly discarded
.
•
For optimum performance, make sure the valve stem on the wheel is free of debris
before connecting the Tire Service Kit
.
•
You can use the Tire Service Kit air pump to inflate bicycle tires
.
The kit also comes
with two needles, located in the Accessory Storage Compartment (on the bottom of
the air pump) for inflating sport balls, rafts, or similar inflatable items
.
However, use
only the Air Pump Hose (7) and make sure the Mode Select Knob (5) is in the Air
Mode when inflating such items to avoid injecting sealant into them
.
The Tire Service
Kit Sealant is only intended to seal punctures less than 1/4 inch (6 mm) diameter in
the tread of your tire
.
•
Do not lift or carry the Tire Service Kit by the hoses
.
WHAT TO DO IN EMERGENCIES
118
Summary of Contents for 500c 2017
