Fiat 500 L 2019, User Manual, Page: 89 / 172

When enabled, active guide lines are overlaid on
the image to illustrate the width of the vehicle
and its projected backup path based on the
steering wheel position
. A dashed center line
overlay indicates the center of the vehicle to assist
with parking
.
When enabled, fixed guide lines are overlaid on
the image to illustrate the width of the vehicle
.
NOTE:
The ParkView Rear Back Up Camera has pro-
grammable modes of operation that may be
selected through the Uconnect System
. Refer to
“Uconnect Settings” in “Multimedia” in your
Owner’s Manual for further information
.
Different colored zones indicate the distance to
the rear of the vehicle
.
The following table shows the approximate dis-
tances for each zone:
Zone Distance To The Rear Of The Vehicle
Red 0 - 1 ft (0 - 30 cm)
Yellow 1 ft - 3 ft (30 cm - 1 m)
Green 3 ft or greater (1 m or greater)
WARNING!
Drivers must be careful when backing up even
when using the ParkView Rear Back Up Cam-
era
.
Always check carefully behind your vehicle,
and be sure to check for pedestrians, animals,
other vehicles, obstructions, or blind spots
before backing up
.
You are responsible for the
safety of your surroundings and must continue
to pay attention while backing up
. Failure to do
so can result in serious injury or death .
CAUTION!
• To avoid vehicle damage, ParkView should
only be used as a parking aid . The ParkView
camera is unable to view every obstacle or
object in your drive path
.
• To avoid vehicle damage, the vehicle must be
driven slowly when using ParkView to be
able to stop in time when an obstacle is
seen
. It is recommended that the driver look
frequently over his/her shoulder when using
ParkView
.
NOTE:
If snow, ice, mud, or any foreign substance builds
up on the camera lens, clean the lens, rinse with
water, and dry with a soft cloth
.
Do not cover the
lens .
87