• After the event occurs, when the system is active, the message "Fuel Cutoff See
Handbook" is displayed.
• Carefully check the vehicle for fuel leaks in the engine compartment and on the
ground near the engine compartment and fuel tank before resetting the system
and starting the engine.
NOTE:
In order to start the engine and move the vehicle to a safe location after an impact, the
System Reset Procedure must be completed.
System Reset Procedure
• After an impact causing air bag deployment, the left and right turn signal lights,
located in the instrument panel cluster, will both be blinking until the ignition is
turned off.
• In order to move your vehicle to the side of the road you must follow the system
reset procedure.
Customer Action
Customer Will See
1. Turn ignition OFF. (Turn Signal
Switch must be placed in Neutral
State).
2. Turn ignition ON.
Left Turn Light is OFF. Right Turn Light
BLINKS.
3. Turn Right Turn Signal Switch ON.
Right Turn Light is ON SOLID. Left Turn
Light BLINKS.
4. Turn Left Turn Signal Switch ON.
Left Turn Light is ON SOLID. Right Turn
Light BLINKS.
5. Turn Right Turn Signal Switch ON.
Right Turn Light is ON SOLID. Left Turn
Light BLINKS.
6. Turn Left Turn Signal Switch ON.
Left Turn Light is ON SOLID. Right Turn
Light is ON SOLID.
7. Turn Left Turn Signal Switch OFF.
(Turn Signal Switch must be placed in
Neutral State).
Left Turn Light is OFF. Right Turn Light
is OFF.
8. Turn ignition OFF.
System is now reset and the engine
may be started.
9. Turn Hazard Flashers OFF (manually).
• If a reset procedure step is not completed within 45 seconds, then the turn signal
lights will turn off and the reset procedure must be performed again in order to be
successful.
WHAT TO DO IN EMERGENCIES
63
