•
On your mobile phone, search for devices equipped with Bluetooth® wireless technol-
ogy (the setting on your mobile phone might be called Discover or New Device)
.
In
this list you will find BLUE&ME™ (name identifying the BLUE&ME™ system on your
car) select it
.
•
When prompted by the mobile phone, enter the PIN number shown on the instru-
ment panel display using your mobile phone keypad
.
If pairing is successful, the system
will say “Connecting” and at the end the display will show as confirmation message, the
ID of the paired mobile phone
.
•
It is essential to wait until you see this confirmation message on the display
.
Pressing
PHONE/MENU button on the steering wheel or MUTE/ESC button before the mes-
sage is displayed may cancel the pairing process
.
If the pairing process fails, an error
message will be displayed: in this event repeat the pairing procedure
.
•
At first pairing, BLUE&ME™ will say “Welcome” immediately after connecting
.
This
message will no longer be heard when your phone automatically connects to the
BLUE&ME™ system on future ignition cycles
.
•
BLUE&ME™ will ask if you would like to copy your paired phone phonebook to
BLUE&ME™
.
It is recommended to copy it
.
To start copying the phonebook say “Yes,”
otherwise say “No
.
”
•
For certain mobile phones the phonebook is not copied automatically, in this case you
must transfer the phonebook contacts using your mobile phone keypad
.
If
BLUE&ME™ asks you to do this, then perform this procedure following the instruc-
tions specific to your mobile phone and press the PHONE/MENU button on the
steering wheel when you have finished
.
Certain mobile phones may require you to
indicate that you do not want to be asked every time to copy the phonebook
.
If this is
the case, this could be indicated by checking a box on the phone during the pairing
process
.
If applicable, this option will only be presented on the phone during the pair-
ing process
.
Making A Phone Call
•
Assume that “John Smith” is one of the contacts stored in your phonebook
.
To call
John Smith, proceed as follows:
1
.
Press the VR steering wheel button and pronounce “Call John Smith
.
” If the name is
recognized, the system will display the recognized contact’s information on the display
screen
.
2
.
If there is just one phone number for John Smith in your phonebook, the system will
ask if you would like to call John Smith
.
To start the call say “Yes,” otherwise say “No
.
”
If John Smith has several phone numbers, the system will ask which phone number
you would like to call (e
.
g
.
: “Call John Smith (at) Work or (at) Home?”)
.
Answer with
the type of required phone number (e
.
g
.
: “(at) Home”)
.
ELECTRONICS
49
Summary of Contents for 2014 500e
Page 1: ...2 014 USER GUIDE ...
Page 75: ...UNDERHOOD COMPARTMENT MAINTAINING YOUR VEHICLE 73 ...
Page 90: ...NOTES 88 ...
