Fiat 2013 BLUE&ME, User Manual

Page: 44 / 132

The system will repeat the complete phone number and
display it.
If the number is complete, say “Dial” or press the
/MENU button on the steering wheel to start the call.
If you have not finished speaking the phone number,
then say the remaining digits and then say
“Dial” or
press the /MENU button on the steering wheel to start
the call.
The system will start the call to the displayed phone
number.
To end the phone call, press the PHONE HANG UP
button on the steering wheel.
You can say the sequence of phone number digits in
“digit groups” which allows you to verify the recognized
number in several small portions. Digit groups are cre-
ated by the pauses you use while pronouncing the
sequence of digits. If you pause after pronouncing sev-
eral digits, a digit group is created. The system will
repeat the recognized digits.
If the spoken digits are correct, you can continue pro-
nouncing the phone number. If the spoken digits are
incorrect, you can delete the digit group by saying
“Delete” . The system will delete the last group of num-
bers and display the partially dialed phone number.
Then, you can say the digit group again and also the
remaining phone number digits.
To cancel the phone call, say “Cancel” .
To cancel the phone call and start dialing again, say
“Start over” .
To ask the system to repeat the recognized phone num-
ber, say
“Repeat” . If no phone number was dialed, the
system says “No number available” .
42 BLUE&ME™ User’s Manual