Fiat 1986 Panda Van, Owner'S Handbook Manual

Page: 139 / 260

❒
use the wrench A provided to fully tighten the
bolts in a criss-cross fashion as per the numerical
sequence illustrated in fig. 106;
❒
when replacing an alloy wheel it is advisable to
place it upside down, with the aesthetic part facing
upwards.
Restore the standard wheel as soon as possible,
because, once placed in the associated compartment,
the luggage compartment load platform is rendered
uneven as the standard wheel is larger than the
space-saver wheel.
REFITTING THE STANDARD WHEEL
Following the procedure described previously, raise
the car and remove the space-saver wheel.
Versions with steel rims
Proceed as follows:
❒
make sure the contact surfaces between standard
wheel and hub are clean so that the fastening
bolts will not come loose;
❒
fit the standard wheel inserting the 4 bolts into
the holes;
fig. 104
F0W0025
fig. 105
F0W0024
fig. 106
F0W0182
135
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX