Fiat 124 Spider 2019, Owner'S Manual

Page: 211 / 304

JACKING AND TIRE
CHANGING
Warning!
Do not attempt to change a tire on the
side of the vehicle close to moving traffic.
Pull far enough off the road to avoid the
danger of being hit when operating the
jack or changing the wheel.
Being under a jacked-up vehicle is
dangerous. The vehicle could slip off the
jack and fall on you. You could be crushed.
Never put any part of your body under a
vehicle that is on a jack. If you need to get
under a raised vehicle, take it to a service
center where it can be raised on a lift.
The jack is designed to be used as a
tool for changing tires only. The jack
should not be used to lift the vehicle for
service purposes. The vehicle should be
jacked on a firm level surface only. Avoid
ice or slippery areas.
Tools Location
Your vehicle may be equipped with a
spare tire, jack, lug wrench and tow
eyes. For details, contact an authorized
dealer.
Tools are stored in the trunk.
Preparations For
Jacking
To Remove The Jack
Proceed as follows:
1. In the right side of the trunk, pull the
cover tab to remove cover.
2. Turn the wing bolt and jack screw
counterclockwise.
08020100-122-002
Jack Tools
1 — Jack Lever
2 — Lug Wrench (If Equipped)
3 — Tow Eyes (If Equipped)
08020101-124-001
Jack Location
1 — Cover Tab
2 — Jack And Tools Cover
08020101-122-001
Jack Components
3 — Wing Bolt
4 — Jack Screw
209