data: 13/01/16
File: P2XT_smd_ing.doc
pag 8 di 10
TEST FUNCTION
Enter programming mode and go to menu
//
//
//
//
, press
RESET/ENTER
, insert password
273
, confirm by
RESET/ENTER
and on the display will be shown 4 dashes witch correspond to the positioner inputs: the dash
in
the
lower
(upper) position means an
open
(closed) input.
The Input test consists of closing the input switches and verify the correspondence between what is visualised
on the display and the following picture:
START
EMERGENCY
PRESET
PIECECOUNTER
DISPLAY
INGRESSO CHIUSO
NESSUNO
To enter
output test
press
RESET/ENTER
on the display 4 dashes are displayed, its last right one flashes. .
Each dash represents an output:.From right to left the dashes are represented as follows: START/STOP,
SLOW/FAST, FORWARD/BACKWARD, POSITIONING END (see next picture).
The flashing dash indicates the selected output.
The dash position indicates the output condition: an
upper
(lower) position means an
active
(inactive,idle)
output.
Press
to select the required output (the flashing dash will change)
Press
to activate the selected output; the selected dash will move to the upper position
(see following picture)
START/STOP
POSITIONING END
SLOW/FAST
FORWARD/BACKWARD
DISPLAY
USCITA ATTIVA
NESSUNA
You can change alternatively from input test to output test by pressing
RESET/ENTER
.
To exit the test mode press
PGM
.
