• Intended Use
Once removed from its original packaging, the SIGMY Low Table must be placed on a perfectly flat surface.
All the SIGMY Low Table's supporting bases must be resting firmly on the surfaces on which it is placed; otherwise, the SIGMY
Low Table may lose stability, making it hazardously unstable. Weights, objects and loads must be evenly distributed across the
surfaces of the SIGMY Low Table and well balanced in order to ensure stability and safety. Unevenly placed or unbalanced weights,
objects and loads on the surfaces of the SIGMY Low Table may reduce its stability and thus its safety.
Sharp items or anything which may damage the glass (such as chemical products containing hydrofluoric acid) should not be
placed on the surface of the SIGMY Low Table. If objects of this kind are placed on the surface of the SIGMY Low Table in spite
of this warning, you are urged to take adequate precautions to prevent damage to the float glass.
When placing sharp objects on the surface of the SIGMY Low Table, a mat of insulating material (such as rubber, cork, plastic or
leather) thick enough to dampen any impacts should be placed between the float glass surface and the sharp objects. Never place
items which may damage the float glass (such as chemical products containing hydrofluoric acid) on the surface.
• Warnings - Incorrect use and Non-recommended use
Below, we provide a series of warnings and examples of incorrect uses or procedures which reduce the safety of the SIGMY
Low Table.
The series of warnings and incorrect uses or procedures provided below is purely guideline and does not cover all the possible
circumstances for incorrect or non-recommended uses of the SIGMY Low Table, which must be evaluated on each occasion.
Do not sit, lean or stand upon the float glass surface of the SIGMY Low Table.
Do not use the float glass surface of the SIGMY Low Table as a chopping surface.
Do not strike the SIGMY Low Table with hammers or pointed items which may crack or shatter the glass.
Do not use powder detergents or detergents containing abrasives for cleaning the SIGMY Low Table, since they may damage the
float glass.
Do not use the SIGMY Low Table for DIY work or for mechanical, electrical or electronic repairs.
In normal conditions of use, do not tilt the product by more than 10°. Any higher angles might reduce the stability of the SIGMY
Low Table.
Never place items at temperatures below -30°C (such as items just taken out of the freezer), or with temperatures above +30°C
(such as foods just removed from the oven) on the SIGMY Low Table; exposing the surface to stresses of this kind may damage
the glass, reducing its strength and thus its safety level.
Never expose the SIGMY Low Table to intense heat sources (such as stoves or ovens); exposing the table to stresses of this kind
may damage the float glass, reducing its strength and thus its safety level. Do not expose the SIGMY Table to temperatures below
-10°C or weather; exposure of this kind may damage the glass, reducing its strength and thus its safety level. The SIGMY
Low Table should be placed well away from items such as coat racks or ornaments which may accidentally fall onto its surface.
• Moving the Low Table
To ensure that the SIGMY Low Table is moved in the conditions of the utmost safety, we urge you to comply with the instructions
provided below:
The Low Table must always be handled wearing gloves which assure a good grip on the float glass.
Safety instructions
2
Summary of Contents for SIGMY 818/T/N/X/B
Page 2: ...1 2 ...
Page 15: ......
