PONTE Coffee Table
Art. 0118-0101-0105-0130-0131-0132-0120-0107-0110-0108
Product description and intended use
1
EN
1.1) Product description and composition
The PONTE Coffee Table - Art. Code 0118-0101-0105-0130-0131-0132-0120-0107-0110-0108 is a Coffee Table intended as an
item of indoor furniture. It is manufactured from curved, annealed float plate glass. The PONTE Coffee Table was produced at the FIAM
ITALIA SPA factory at Via Ancona 1/B, 61010 Tavullia (PU), Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it.
1.2) Intended use
The article known as PONTE is designed and built to serve as an indoor Coffee Table and must therefore be used only for this
purpose and no other.
For more information about the product's intended use please refer to section
“2) SAFETY INSTRUCTIONS”
.
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.
To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the
telephone numbers stated in this document.
2.1) Transporting and storing the PONTE Coffee Table in the original packaging
The PONTE Coffee Table, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking.
It must be stored indoors in a dry place.
Place the PONTE Coffee Table in the original packaging, in the horizontal position. The arrows on the label on the packaging must
be vertical and pointing upward.
Never place weights or loads in excess of 100 Kg (art. 0118, 0101,0105 and 0107) of 150 kg (art.0130,0131,0132 and 0120)
of 120 kg (art. 0110 and 0108) since exceeding this weight may cause the breakage of the article.
The PONTE Coffee Table in the original packaging weighs about 26 kg (article 0118), about 48 kg.(art. 0101), about 86 kg (art.
0105), about 69 kg (art.0130), about 79 kg (art. 0131), about 86 kg (art.0132), about 70 kg (art.0120), about 33 kg (art 0107),
about 47 kg (art. 0110) or about 53 kg (art. 0108).
It must therefore be placed on surfaces capable of supporting its weight.
2.2) Removing the packaging - assembly
To remove the original packaging of the PONTE Coffee Table, proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not strike the PONTE Coffee Table with hammers or pointed
items which may crack or shatter the glass.
c) Remove the PONTE Coffee Table from its packaging. At least two people are required for this operation. Wear gloves which
assure a good grip on the float glass.
Safety instructions
2
