FIAM. AURA AU/100, Product Information

Page: 13 / 24

Cleaning and care
3
Disconnect the power supply cable before cleaning or maintenance and take care not to pour liquids onto the lamps
and the power supply.
• Cleaning
Some household and furniture cleaning products may damage the float glass from which the Showcaseis made.
When cleaning the float glass of the Showcase, we advise use of a dry cloth or leather only.
We advise you not to use powder detergents or detergents containing abrasives for cleaning the Showcase, since they may scratch
the float glass.
Warning: do not use alcohol or solvents
• Maintenance
The AURA Showcase requires regular care to keep it in peak condition and ensure safety. If the Showcase or any part of it is
chipped or broken, contact the producer or the sales outlet where the product was purchased for the technical and shape
specifications of the Showcase or the damaged part.
For maintenance purposes, the lamp holder, cable and feet should be inspected for wear. If the external flexible cable of this
appliance is damaged, it must be replaced by a special cable available only from the manufacturer or its service.
• Safety warnings and precautions
WARNING: the producer does not accept any liability for damage in the event of:
• incorrect use and use not in accordance with the article's intended purpose
• tampering with the power supply cable or other electrical components
• tampering with any component of the product
Keep the instructions for use in a safe place
Never place in contact with water or damp
Do not connect the product to the electrical mains if the power supply cable is damaged. If electrical components require
replacement (cables, plugs, etc....) have the work done by skilled staff.
Ensure that the power supply cable does not pass close to sharp corners or edges, or especially over objects which produce heat
or in the vicinity of corrosive substances. Do not remove the plug by pulling on the power supply cable.
Do not place the switch on the ground in damp conditions or where water may collect.
Turn off the switch and disconnect the power supply plug from the socket before cleaning.
FAILURES
In the event of failures, faults or suspected faults, disconnect the plug from the power point at once and call in skilled staff.
Electricity can be dangerous! Therefore, always comply strictly with safety regulations.
13/24