S
ETTING UP THE
POP
NETSERVER
2000
FIA POPnetserver 2000 User’s Guide
8
Setting up the POPnetserver 2000
The following basic steps provide an overview of what must be done to
get your POPnetserver operational.
1.
Physically place the unit.
2.
Connect both the power and appropriate network cable.
3.
Apply power and allow the system to boot.
4.
Insert the POPassist Utility and User’s Guide CD into your CD-
ROM drive to run the POPassist utility to search for and map the
POPnetserver.
5.
Use the POPmanage utility to modify the default configuration.
More detailed instructions for these steps can be found in the following
sections and
Chapter 3: Configuring a New POPnetserver.
