Fhiaba FP24BWR-RGS, User Manual

Page: 34 / 104

34 www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
11.2 Malfunction indications appearing on the display
Display message Malfunction description
Power Failure
Prolonged interruption of electrical power
The appliance starts up again automatically and indicates
the highest recorded temperatures.
Door open
Door open
this message appears few minutes from the door opening
Drawer open
Drawer open
this message appears few minutes from the drawer opening
Cellar too warm
Cellar (Wine Cellar) compartment too warm
See the troubleshooting guide
Cellar too cold
Cellar (Wine Cellar) compartment too cold
Wait 12 hours. If the problem persists, contact Customer Care
Cantina too warm
Cantina compartment too warm
See the troubleshooting guide
Cantina too cold
Cantina compartment too warm
Wait 12 hours. If the problem persists, contact Customer Care
Fridge too warm
TriMode compartment (refrigerator mode) too warm
See the troubleshooting guide
Fridge too cold
TriMode compartment (refrigerator mode) too cold
Wait 12 hours. If the problem persists, contact Customer Care
Cooler too warm
TriMode compartment (cooler mode) too warm
See the troubleshooting guide
Cooler too cold
riMode compartment (cooler mode) too cold
Wait 12 hours. If the problem persists, contact Customer Care
Freezer too warm
TriMode compartment (freezer mode) too warm
See the troubleshooting guide
Freezer too cold
TriMode compartment (freezer mode) too cold
Wait 12 hours. If the problem persists, contact Customer Care
Error Code...
Functional problems
call Customer Care who may help you to salve the problem or put you in
contact with the nearest Service Agent
Check condenser
Check Condenser
Every 6 months the display shows the message “Check Cond”, clean the
condenser and press for 5 seconds the Enter button to reset.
11. TROUBLESHOOTING GUIDE
> In case of anomalities, touch the button Alarm and the display will show the anomaly message with its
error number code.
> The message will be shown for 3 seconds, then it will go back to the home screen .
> For blocking the message on the screen, press on the display, the button info ( ). The message will be on
the screen for 30 seconds, then it will go back to the home screen.
> In the case there is more than one error message, the dispay will show in time sequence the different
anomalies messages.