25
2
3
1
B
A
6,5 (
¼”
)
6,5 (
¼”
)
20 (
¾”
)
20 (
¾”
)
22 (
7⁄8”
)
22 (
7⁄8”
)
22 (
7⁄8”
)
22 (
7⁄8”
)
www.fhiaba.com · [email protected] · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
Installation Guide
Appliance
Wall
or
furniture
Wall
or
furniture
Installation
For a built-in installation, to close gaps between the appliance and
the adjacent cabinets, special side pro
À
les and aluminum covering
frames are provided.
Operate as follows:
Push the appliance into the installation niche 1 .
If the unit is to be installed inside a niche or within an enclosed
structure, it is necessary to design a ventilation shaft at the back of
the niche to assure proper ventilation at the back of the unit. A 5 mm
gap is suf
À
cient to prevent overheating. Always mount front panels on
door and drawer before pushing the unit into its
À
nal position inside the
niche or structure.
Secure the appliance to the adjacent cabinets by
À
xing to these the
side pro
À
les previously mounted on the appliance 2 .
To make this operation easier keep the door and the drawer open.
Check the levelling of the appliance, adjusting its feet and wheels
to correct it.
Mount the pro
À
les the covering frames:
À
rst insert them laterally and
then push
À
rmly until a “click” is heard 3 .
A Connecting element
B Alluminium frame
Built-in installation single appliance
Side pro
À
les mounting
Series: All
