Short manual FernTel IP Ship
Page 7
1.3
Mounting and Installing
1.3.1
Wall Mounting
Fasten the telephone mount with 4 screws (2). Place the provided washers Ø 18 mm
under the screw head.
Figure 3: Mounting on a wall
Place the telephone in the upper latches (A), swing it downwards until the lower
latches audibly engage (B).
Remove the keypad plate (6), and tighten the two locking screws (3) as far as they
will go.
Important: This preserves the IP65 degree of protection.
Bore illustration
(not to scale)
*
only for version with
cable entry backwards
