9
Mounting and installing
Wall version
Fasten the telephone mount with 4 screws
(2)
. Place the provided washers Ø 18 mm under
the screw head.
Place the telephone in the upper latches
(A)
, swing it downwards until the lower latches
audibly engage
(B)
.
Remove the keypad plate
(6)
, and tighten the two locking screws
(3)
as far as they will go.
Important: This preserves the IP65 degree of protection.
Pull the telephone line through the cable gland
(4)
and connect it with terminal
(5)
TCP/La -
TCP/Lb (TCP : Terminal Connection Point).
In case of factory fitted cable glands the attached operating instructions have to be
considered.
Bore
illustration
(not to scale)
