31
LUBRICATION AND MAINTENANCE
Figure 35
WARNING:
Be careful not to pinch
fingers when removing belt.
7.
Clean the belt area.
8.
Turn each pulley to check for abnormalities. If any abnormality is noticed, repair or replace the pulley.
9.
Install the new belt.
10. Install the gearbox mounting bracket
②
, and tighten the bolts, Figure 35.
11. Install the tension spring
①
.
12. Install the belt shields.
13. Install the Mower to the Tractor. Refer to "INSTALLING THE CUTTER-DECK" section.
STORING THE MOWER
1.
Raise the mower and stop the engine.
• Clean the underside of the Mower.
• Sharpen or replace the blades.
• Apply touch-up paint to prevent rust.
2.
Park the Tractor where you plan to store the Mower, and remove the Mower from the Tractor.
• Remove the belt shields. Clean the belt area.
• Check the condition of belt. Replace the belt, if necessary
• Check the bolt torques of the gearbox mounting brackets.
• Install belt shields.
3.
Lubricate all fittings as shown on page 24.
4.
Check all hardwares for proper torques.
5.
Apply touch-up paint to prevent rust.
①
②
