CLEANING THE FLAKER MILL
From time to time, or if the Family Flaker Mill has not been used form sometime, we
recommend a through cleaning of the mill work.
Clean the millwork with a dry soft brush. Do not immerse the parts in water or clean them
under running water. Wipe off the parts of the housing with damp cloth. The roller and the
cone should be cleaned dry with a soft brush. NEVER PUT THE FLAKER MILL IN THE
DISHWASHER.
DISMANTLING THE FLAKER MILL ATTACHMENT
:
Unplug your Bosch Universal Mixer
Remove the flake mill from the Bosch Universal Mixer before dismantling the flaker mill.
Remove the funnel, (6) untighten the screws (5), Remove the housing (4) pull the knurled
roller (3), remove the key (2).
ASSEMBLING THE FLAKER MILL ATTACHMENT
The flaker mill must be removed from the Bosch Universal Stand Mixer before re-
assembling the flaker mill.
1. Insert the key (2) into the slot that is provided in the front housing.
2, Push in the knurled roller (3).
3. Place the back housing piece against the front piece and fix it with the screws (5) 4.
replace the funnel.
1.
Housing
2.
Key
3.
Knurled roller
4.
Housing
5.
Screws
6.
Funnel
MOUNTING
ATTACHMENTS TO THE BOSCH UNIVERSAL STAND MIXER
1. Before attaching the grain mill or flaker mill, turn off and unplug the mixer.
2. Place the Bosch Universal Mixer on it’s side.
3. Insert the grain mill with the silver notch fitting into the coupling of the Bosch Universal
Mixer
4. The white lever on the back of the flaker mill will lock in the mill. The lever should be
pointing to 9 o’clock and must be turned clockwise until the lever has locked the flaker
mill on to the mixer (pointing to 3 o’clock.)
5. Place the hopper into the opening.
REMOVING
ATTACHMENTS TO THE BOSCH UNIVERSAL STAND MIXER
1. Before removing the grain mill or flaker mill, turn off and unplug the mixer.
2. Remove the hopper
3. Turn the white Lever on the back of the flaker mill from the 3 o’clock position to the
9 o’clock position
4. Remove the Flaker Mill.
FLAKER MILL
ILLUSTRATED ON BOSCH MIXER