5
DO NOT POWER UP THE LIGHT UNTIL IT IS FULLY ASSEMBLED AND HUNG OVER
THE GROW AREA.
Mounting the Power Supply:
Mount the power supply by attaching the four wing nuts and washers to the screws
protruding on the light frame (C). Tighten securely but do not over tighten the nuts.
Illustration C
Place power supply enclosure on top of brackets, aligning the bracket mounts with
the receivers. The snap connector wiring connections are universal however they are
slightly different lengths. Ensure the power supply is aligned with the snap connector
that easily connects to both ends without pulling or stretching the cables.